GENERAL SAFETY RULES

nelsonfan · 发表于 2010-10-27 14:06

GENERAL SAFETY RULES

1.In case of sickness or injury, no matter how slight, report at once to your supervisor for First Aid.  Never attempt to treat your own, or another worker’s, injury or try to remove foreign particles from the eye.  All injuries must be reported immediately.

2.Safety devices are for your protection.  Never operate your machine unless all guards provided are in place.

3.Guards must never be removed, except when necessary, to make adjustments or repairs, and they should be replaced immediately upon completion of work.  If a guard is not in its proper position, report this at once to your supervisor.

4.Employees must remain in their own departments unless called away on business or in the regular course of their employment.

5.RUNNING on the premises is NOT PERMITTED.

6.Horseplay, throwing objects, scuffling, and fooling around are very dangerous and will not be tolerated.

7.Never distract the attention of another employee, you might cause an injury.

8.For any job, jewelry, rings, bracelets, watch chains, key chains, etc., shall not be worn, for these objects might catch in machinery, causing serious accidents such as the loss of fingers or hands.

9.Gloves must not be worn when operating machinery unless their use has been approved by your supervisor.

10.Loose clothing or ties, or torn clothing must not be worn around machinery.  It is suggested that sleeves be cut off at the elbow.

nelsonfan · 发表于 2010-10-27 14:07

11.Before using any ladder, make sure it has good safety feet, and is free from cracks, broken rungs, or other defects.  When there is any danger of slipping, have another worker hold the ladder or secure the ladder.

12.Do not attempt to lift or push objects that may be too heavy for you.  ASK FOR HELP when you need it.  Learn to lift the right way to avoid strains: bend your knees, keep your body erect, then push up with your legs, and keep the object being lifted close to your body.  This is the easiest and the safest way.

13.Shut down your machine before cleaning, adjusting, or repairing it.  Lock and tag the machine.

14.Never oil machines while they are in motion except where points of oiling are so located or guarded that you are not subject to contact with moving parts.

15.Never use finger for removing chips from machines--use a brush or hook.

16.Never use defective chisels, sledge hammers, punches, wrenches, or other tools.  Flying chips from tools with mushroomed or split heads cause many injuries.  Exchange or see that the defective tools are repaired.

17.If you are provided with eye protection, you are expected to wear it.  If side shields are required, make sure yours are in place.

18.Never operate any machine, crane, tractor, elevator, or other piece of moving equipment unless you have permission from your supervisor and are trained it its use.

19.Caps should be worn around moving machinery by any employee with long hair.

20.If you are working where there are heavy fumes or dust, you are expected to wear the respirators provided for your protection.  In some cases, a lifeline and an observer may be required.

nelsonfan · 发表于 2010-10-27 14:07

21.Keep the area around you clean.  Put oily water, rubbish, and papers in the containers provided for those purposes.

22.Learn the location of all the fire exits and alarm boxes in your department.

23.Pile material, trucks, skids, racks, crates, boxes, ladders, and other equipment so that they do not block aisles, exits, fire fighting equipment, alarm boxes, electric lighting, power panels, etc.  FIRE DOORS MUST BE KEPT CLEAR.

24.Learn the location and proper use of fire-fighting equipment in your department.  Under no circumstances use a pail of water where extinguishers are provided.

a)For all electrical fires, use only extinguishers approved for Class C fires (carbon dioxide or dry chemical).  NEVER USE ANYTHING ELSE, as the danger of electrocution exists.

b)For common fires, such as rubbish, paper, wood, rags, etc., use water, foam, soda-acid, or dry chemical extinguishers.

c)For fires in flammable liquids, use foam, CO2 type extinguishers, or other special extinguishers rated for class B fires provided for that purpose.

25.Slippery floors cause falls.  Always keep the floor clean and dry.

26.If you see someone working carelessly who is liable to be hurt, warn and advise them to work carefully.

27.Protect your feet by keeping your shoes (especially the soles of the shoes) in good shape.  Wear proper footwear.

28.Unless you are a trained electrician, never tamper with electrical circuits or switches.

29.Always obey all warning signs.

30.Read the Safety Bulletins that are posted, for they will help you do your part in the accident prevention drive.

31.Never take shortcuts through dangerous places.

32.If you do not know the safe way, stop and find out.

33.Always use proper tools for the job.

bwang · 发表于 2011-1-2 03:06

thank you

土拔鼠 · 发表于 2011-1-10 20:21

thanks for sharing with us

yjuname · 发表于 2017-3-2 18:14

不错，学习学习

chenaijie1314 · 发表于 2017-5-29 10:49

不错的东西！

		自动登录	找回密码
密码			注册

GENERAL SAFETY RULES

相关帖子