找回密码
 注册
查看: 2696|回复: 2

请教高手有关Respirator法规的问题

[复制链接]
发表于 2007-3-1 03:07 | 显示全部楼层 |阅读模式
在OSHA指定的有关呼吸保护的法规Respirator Protection(法规编号 29CFR1910.134)中有一个 Assigned protection factor 的表格,请问其中的数字到底代表什么?
Table 1._Assigned Protection Factors \5\----------------------------------------------------------------------------------------------------------------                                                                                                        Loose-           Type of respirator \1,\\2\              Quarter     Half mask       Full     Helmet/hood    fitting                                                     mask                   facepiece                 facepiece----------------------------------------------------------------------------------------------------------------1. Air-Purifying Respirator....................            5       \3\ 10           50  ...........  ...........2. Powered Air-Purifying Respirator (PAPR).....  ...........           50        1,000      \4\ 25/           25                                                                                              1,0003. Supplied-Air Respirator (SAR) or Airline Respirator....................................    • Demand mode........................  ...........           10           50  ...........  ...........    • Continuous flow mode...............  ...........           50        1,000      \4\ 25/           25                                                                                              1,000    • Pressure-demand or other positive-   ...........           50        1,000  ...........  ...........     pressure mode.............................4. Self-Contained Breathing Apparatus (SCBA)...    • Demand mode........................  ...........           10           50           50  ...........    • Pressure-demand or other positive-   ...........  ...........       10,000       10,000  ...........     pressure mode (e.g., open/closed circuit).
发表于 2007-3-2 00:47 | 显示全部楼层
指定防护因数(assigned protection factor).若 特定有害物之容许浓度值为PEL,则防护具的最
大使用浓度(maximum use concentration) MUC=APF ×PEL,在此APF即为指定防护因数.

如,甲苯的PEL=100ppm,则指定防护因数(APF)为10的面罩只能用于现场有害物浓度小于100×10=1000ppm的环境。
 楼主| 发表于 2007-3-26 03:20 | 显示全部楼层
多谢! 真是老法师啊!
您需要登录后才可以回帖 登录 | 注册

本版积分规则

网站业务合作!

QQ|安全论坛 ( 晋ICP备2023016270号-1 )

GMT+8, 2026-5-5 15:53

Powered by anquan X3.9 Licensed

© 2003-2026 Azh Ltd.

快速回复 返回顶部 返回列表