INTERNATIONAL STANDARD(ISO 11014-1)（英文）2

117

4 General aspects
An SDS applies to a chemical product as a whole.
Information contained in an SDS is non�瞔onfidential. Confidential information on ingredients may be given in a different way, provided section2 of annex A is observed.
Any supplier should provide a complete SDS to the recipient and shall report relevant information on safety, health and environment. The supplier has the obligation to keep the SDSs up to date and to provide the recipient with the latest edition.
The recipient of an SDS is responsible for acting in accordance with a risk assessment in regard of the conditions of product use and for taking necessary precautionary measures in a given work situation, and has the responsibility to keep the users informed about the hazards relevant to their individual workplace.
The recipient of an SDS is responsible for choosing the appropriate way of informing the users. When formulating the specific instructions for the workplace, the recipient should consider the general recommendations of relevant SDSs. Since an SDS is merely product-related, it cannot take into account all the possible situations which may arise at any given workplace. Therefore an SDS only constitutes part of the information necessary to establish a safety programme.
5 Contents and general layout of an SDS
An SDS shall provide the chemical product information given under the following 16 standard headings，the wording, numbering and sequence of which shall not be altered:

1 Product and company identification
2 Composition/information on ingredients
3 Hazards identification
4 First-aid measures
5 Fire-fighting measures
6 Accidental release measures
7 Handling and storage
8 Exposure controls/personal protection
9 Physical and chemical properties
10 Stability and reactivity
11 Toxicological information
12 Ecological information
13 Disposal considerations
14 Transport information
15 Regulatory information
16 Other information

Under each of the 16 standard headings, relevant information shall be stated. If this information is not available, then it shall be stated why not. Blanks shall not be left, with one exception understandard heading 16 "Other information", where a blank is allowed. In an SDS, the sources of information do not normally have to be specified.
The 16 sections corresponding to the 16 standard headings shall be completed in accordance with the recommendations and requirements of annex A "Instructions for the compilation and completion of an SDS".
These 16 sections may be subdivided by means of subheadings. However, unlike the16 standard headings, the subheadings shall not be numbered.
The use of subheadings where appropriate is recommended. When subheadings or items are given, they shall be given in the sequence specified in annex A.
Every page of an SDS shall include the name of the chemical product as used on the label. and shall be dated and numbered. The page numbering system should include the total number of pages or should indicate the last page as such. The date indicated shall be the latest revision date.
The 16 sections shall be separated clearly. The headings and subheadings shall be presented in a conspicuous way.
Texts in an SDS should be written in a clear and concise manner. Commonly used phrases are recommended. An SDS should be in a language acceptable to the recipient
Annex A (normative)
Instructions for the compilation and completion of an SDS
The following instructions are intended as guidance for the compilation and completion of SDSs. Their purpose is to ensure that the content of each of the sections listed will enable recipients to take the necessary measures relating to safety, protection of health at the workplace and protection of the environment.
-The 16 sections of SDSs shall be completed in accordance with the recommendations and requirements of this annex.
-This annex lists the main items which will be used to complete the 16 sections. This annex lists the main items only, because it is impracticable to list all items which may possibly be included in an SDS.
-These main items may be used as subheadings in an SDS. If they are used, the wording given is recommended, not obligatory. The preferred wording is underlined. Other items may be used as subheadings, but are not recommended.
-Information not specifically relevant to one of the items/subheadings mentioned in this annex, but relevant for the SDS，may be stated under an additional subheading，called for instance "further information" or "Specific data".
-For a given chemical product, not all of the items/subheadings listed have to be used and completed, since some of them are optional.
-Items/subheadings shall be included in the SDS in accordance with the following criteria:
Standard: the notation [S] associated with an item/subheading indicates that the accurate data or information shall be supplied in every case and for every product, thus providing complete information. Statements such as "not relevant"， "not applicable" and "not available" are not authorized in these cases.
Informative: the notation[ I] associated with an item/subheading indicates that explicit information shall be given, even though the corresponding items are not relevant to the product concerned or the information is not available yet. Statements such as "not relevant", "not applicable" and "not restricted" may be used, if they can be justified, Professional judgement should be used in selecting these statements.
Applicable: the notation[ A] associated with an item/subheading indicates that both the items and the data listed may be relevant to.
-the product concerned (properties, use, etc.);
-Local requirements;
-safety, prevention and protection.
Subheadings marked [A] for which no information is available shall be deleted.
-In no case,[S].[I]or [A]，are subheadings without relevant information allowed.

cnw03330

thanks your share！